[Fix] Smart Light Bulb Blinking and Flickering (100% Working)

Smart light bulbs have become increasingly popular due to their ability to be controlled by a smartphone or smart home assistant, providing convenience and energy savings. However, like any technology, smart light bulbs can experience issues such as blinking, which can be frustrating for users. Smart bulbs can blink for various reasons. There can be something wrong with the smart bulb itself, or there can be an issue with the fixture associated with the light or another area of your house. In this article, we will explore the possible causes and solutions to the issue of a smart light bulb blinking.

Smart Light Bulb Blinking and Flickering

Why is My Smart Light Blinking?

There can be several reasons why a smart light bulb may be blinking:

Your Smart Bulb is Blinking Due to the Bulb Itself

There are several potential factors involving the bulb itself that cause smart bulbs to blink or flash. The smart bulb’s owner’s manual can be used to address the majority of these issues.

1. The Lightbulb is Configuring or in Pairing Mode

Your smart bulb has to pair with the current system when it is first installed. Some smart lights can connect to your Wi-Fi, while others can connect to your phone’s Bluetooth. Your smart bulb may flicker to let you know it has been configured and is ready to use.

2. The Blinking is Caused by a Wi-Fi Connectivity Problem

Your smart bulb will flash when first configured while in pairing mode. Once in pairing mode, the smart bulb might keep blinking if the Wi-Fi signal is weak or nonexistent.

3. Your Smart Bulb Needs to be Reset

Your smart bulb might require a manual reset if the first two alternatives have failed. The smart bulb can be manually reset to its default factory settings. All settings you currently have in place will be lost as a result.

4. Monitor the Wi-Fi Connection Very Closely

The smart bulb might need to be relocated to a better-connected part of your home or closer to the Wi-Fi if there is a persistent Wi-Fi connection problem.

5. Your Smart Bulb is Blinking Due to an Issue within Your House

Blinking smart bulbs could also be a result of internal home issues. Blinking smart bulbs may be caused by any form of outdated or broken electrical wiring inside your home.

Why is My Smart Light Bulb Flickering?

There are several reasons why a smart light bulb may flicker. Here are some of the most common reasons:

Poor Connection: A poor connection between the smart bulb and the fixture can cause flickering. This could be due to loose wiring or a poor connection between the bulb and the socket.

Voltage Fluctuation: Voltage fluctuation in the electrical system can cause the flickering of the smart light bulb. This is particularly true if the voltage is too high or too low for the bulb.

Incompatible Dimmer Switch: If the smart bulb is installed on a dimmer switch that is not compatible with the bulb, it can cause flickering. This is because the dimmer switch may not provide the correct amount of power to the bulb.

Old Bulb: If the smart bulb is old, it may start to flicker before it fails completely. This is a sign that the bulb needs to be replaced.

Interference: Interference from other wireless devices can cause the flickering of the smart light bulb. This can be due to a number of factors, including distance from the wireless router, signal strength, and interference from other devices.

How Do I Stop My Smart Bulb from Blinking?

The following are some potential remedies for the problem of a smart bulb blinking:

Fix 1: Issue with the Smart Bulb App Settings

The light bulb may flicker if there is a problem with the smart bulb app setup. If the app debugging proves to be too difficult or time-consuming, you may always manually reset the smart bulb app to its factory settings.

Fix 2: Repair an Issue with a Light Switch or Fixture for Your Smart Bulb

Flashing could result from a bad connection between the smart light bulb and the fixture on/off switch or light switch. You must toggle the switch on and off to diagnose the connection. If your lights dim when you turn them on or off the switch, you may have a defective light switch. If the light switch is installed in a lamp socket, the complete socket will need to be replaced. Except that, this is a rather straightforward process that just involves some basic wiring.

Fix 3: Loose Light Plug for Your Smart Bulb

If only one smart bulb put in a lamp exhibits the flashing problem, a loose connection between the outlet and the plug may be to blame. Make sure the lamp’s plug is firmly put into the wall power outlet. If the connection turns out to be loose, unplug it, straighten the metal prongs on the socket, and then plug it back in.

Fix 4: Outdated or Loose Wiring Connections for Your Smart Bulb

An electrical wire plug with faulty connections is another potential reason for smart bulb flashing. Verify the condition of the cord plug and that it is not loose in the outlet. You’ll need to buy a new one if the cord or plug end is broken.

Fix 5: Issue with the Smart Light Bulb Itself

The source of a smart light that flashes nonstop could be a broken gadget. Many problems could arise as the smart bulb gets older. If a malfunctioning smart light bulb is the source of your flickering issue, you can fix the issue by changing the lighting component. This is a simple and reasonably inexpensive task.

You must first turn out the light before replacing a smart bulb. As soon as the bulb has cooled, unscrew it from the fixture. To choose the right replacement, look at the light bulb’s indicated wattage.

You can also follow this video to solve this problem:

How do I Stop My Smart Bulb from Flickering?

If your smart bulb is flickering, here are some steps you can take to troubleshoot the issue and stop it from flickering:

1. Check the Bulb Compatibility: Make sure the smart bulb is compatible with your smart home system and the bulb socket. If not, replace it with a compatible one.

2. Reset the Bulb: Try resetting the bulb to its default settings. The reset process may differ based on the brand of the bulb, so refer to the manufacturer’s instructions.

3. Check the Wi-Fi Signal: Poor Wi-Fi signal can cause the smart bulb to flicker or not work at all. Move your router closer to the bulb or use a Wi-Fi extender to boost the signal.

4. Update the Firmware: Check if there is a firmware update available for the bulb and update it if necessary.

5. Replace the Bulb: If none of the above steps work, it may be time to replace the bulb.

You can also follow this video Flickering LED Light Bulb: Troubleshooting Guide and Easy How to Fix

How do You Reset a Smart Light Bulb?

If all else fails, resetting the smart light bulb may be the solution. Here are the general steps to reset a smart bulb:

  • Turn off the power to the bulb for at least 5 seconds.
  • Turn on the power to the bulb and wait for it to start flashing.
  • Follow the manufacturer’s instructions for resetting the bulb.

Frequently Asked Questions

Why is My Smart Light Not Connecting?

If your smart light bulb is not connecting to your smart home assistant, it may also be related to connectivity issues. Some common reasons include:

  • Weak Wi-Fi signal or internet connectivity issues
  • The smart light bulb may be too far from the smart home assistant, making it difficult to connect.
  • The smart bulb may not be compatible with your smart home assistant.

Are Smart Light Bulbs Cost-Effective?

Certainly, the customer will save money in a variety of ways even if an incandescent light bulb costs about $1 on average and a smart bulb cost about $8. Secondly, think about one of the key motivations for buying a smart bulb: lower energy output. About 75% less energy will be used by the smart bulb than by a conventional bulb. As a result, the user reduces their energy output costs.


In conclusion, a smart light bulb blinking can be caused by several issues, such as Wi-Fi connection issues, firmware updates, power interruptions, overheating, or compatibility issues. To stop the blinking, you can check the Wi-Fi connection, update the firmware, power cycle the bulb, check the compatibility, or reset the bulb. If the issue persists, it may be necessary to replace the bulb with a new one. Hopefully, this article was helpful to you.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top