Smart lights are becoming more and more common because of how convenient and energy-efficient they are. To benefit from the lights’ “smartness,” such as connecting with your virtual assistant for voice control, remote control, or control from the brand’s app, they must be linked to your network. When the smart bulb cannot access your Wi-Fi network, it can be annoying. Don’t give up on smart lighting; this article might help you locate and resolve the issue with the smart bulb connection.

Why Is My Smart Light Not Establishing a Wi-Fi Connection?
Your smart light may not be connected for several different reasons. Among them are:
1. Suitable Network
When utilizing a 5 GHz Wi-Fi network or if the smart light is too far from the router, it won’t connect to your network. While installing smart lights, make sure the bulb is within the network’s coverage area, utilize the suitable 2.4 GHz Wi-Fi band, and turn off VPN (Virtual Private Network) on your mobile device.
2. Disruption of the Connection to the Bulb
Like other technological devices, Smart Lights are susceptible to mistakes and problems. When their operation is occasionally disrupted, such as when the WiFi network settings are changed or there is a power outage, the bulb may become unresponsive. If your smart hub loses connection or your wireless router malfunctions, your smart bulb may become unresponsive.
You should be able to resolve this issue by doing the same power cycle procedure on one or both devices.
3. A Problem with the Settings
Unfortunately, turning the power on and off again does not clear your smart bulb’s settings. Your lightbulb will continue to operate in the same manner as when it was first reset. Turning the bulb on and off will not solve the problem in this case if the settings are the cause. A hard reset is required in this situation.
4. The Network Is Unable to Support Your Smart Bulb
When configuring smart home devices, connectivity problems are frequently experienced at first. If your network is not designed to accommodate several devices dispersed over a wide area, it happens even more frequently.
Your smart lights may be unable to connect to your Wi-Fi network if you discover that they are not responding. The smart bulb may not be inside the Wi-Fi router’s coverage in this instance. As an alternative, your network likely lacks the capacity to support all the devices you’re connecting to it.
How Do I Reconnect My Smart Light to Wi-Fi?
Troubleshoot your setup to find the issue and resolve it to get your smart light to connect to your home network. You can follow these steps:
1. Check Wi-Fi Settings on Your Router
Only the 2.4 GHz network frequency band is compatible with smart light bulbs. Modern router models provide simultaneous or independent Wi-Fi SSID broadcasts at 2.4 and 5 GHz. Create unique names and passwords for the two networks and connect your Smart bulb to the 2.4 GHz option if your model supports separate SSIDs.
Turn off the 5 GHz option in your router’s admin panel if, on the other hand, both networks share a single SSID. Reactivate the 5 GHz setting after connecting the smart lights to continue experiencing fast connectivity. Reboot the router to make the changes take effect after you’ve made them and saved them on the portal. Reconnect the router to power after unplugging it from the outlet and waiting 20 to 30 seconds.
2. Turn off Your VPN
While connecting your Smart Life bulb to your Wi-Fi network, make sure any active VPNs are disabled on your mobile device. The VPN hides your device’s IP address so that the router won’t notice any new devices that are connecting to it. Restart the device and disable the VPN to improve your network connection. Try attaching the light once your phone has restarted.
Once more, an ad blocker or ad guard might have a VPN-like effect. To add your smart light bulb to the app, temporarily disable any ad blockers that are installed on your device.
3. Move the Smart Bulb Closer
For a good network signal, the smart bulb should be placed a short distance from the network router. This guarantees that the light is within the range of your Wi-Fi network signal. During setup, if your bulb is too far away, it might only receive a spotty signal, making it impossible for the app to find and initialize it. Now try reconnecting your lamp by moving it nearer to the router.
4. Reset the Smart Bulb and Reconnect
Make sure that your bulb is in pairing mode before connecting it. A series of flashes from smart bulbs signal pairing mode. To put the smart bulb in pairing mode, reset it. Connect the bulb to a regular fixture to reset it. Please briefly switch the light off after being in the ON position, then turn it back on. Now, carry out this procedure 5–10 times more. You can go forward as soon as your light sensors blink.
5. Connect the Light in AP Mode
Unlike the normal EZ mode, Ap mode enables you to connect to the device’s hotspot. This setup option is provided by some well-known smart light manufacturers like Feit and Smart Life.
To connect the device’s network when in ap mode, select “Settings” from the menu. Typically, this happens after entering your Wi-Fi information. The app directs you to access the network settings on your phone, establish a connection, and then return to the bulb setup app to complete the procedure.
Frequently Asked Questions
How Do I Put My Smart Light in Pairing Mode?
By following the instructions in the manufacturer manual, you might easily reset your device (Smart Life Light Bulb) here. Just turning on the light for three to five seconds, then turning it off again in the same three to five seconds will accomplish the task for you. This should be done three times in total. When the light is on, a consistent flash signifies that the reset was accomplished. Next select “Discover” and switch off the light. Turn on the Smart Bulb to complete the pairing process.
What to Do When Smart Life Bulb Not Connecting to Alexia
It appears challenging to connect Alexia to the SMART life bulb. The helpful solution is listed below.
Go to the menu and choose “games and skills.” Hit the search button and type “Light bulb.” If it does, click the Allow option and sign in with your email and password using the details you provided. Choose Light Bulb (Smart), then link or connect it. To complete the connection to Alexa, choose Enable, Allow, or Authorize.
Conclusion
In conclusion, smart lights are a great addition to any home. However, they can sometimes have connectivity issues. By following the troubleshooting tips provided in this article, you can resolve most connectivity issues and get your smart light back online in no time.